 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| E-Series RF 1:1 Flux Coupled Transformer 3 - 200 MHz Features * * * * 1:1 Impedance Ratio CT on Secondary Surface Mount Tape and reel packaging available ETC1-1T V10 SM - 22 Package Description M/A-COM's ETC1-1T is a 1:1 RF flux coupled transformer in a low cost, surface mount package. Ideally suited for high volume applications. Parts are packaged in tape & reel. Electrical Specifications: TA = 25C, Z0 = 50 1 Parameter RF Frequency Insertion Loss Amplitude Imbalance Phase Imbalance Input Return Loss Test Conditions -- -- -- -- -- Frequency 3 - 200 3 - 200 3 - 50 3 - 200 3 - 50 3 - 200 3 - 200 5 - 120 Units MHz dB dB dB Degrees Degrees dB dB Min -- -- -- -- -- -- -- -- Typ -- -- -- -- -- -- -- -- Max -- 1.5 0.1 0.5 1.0 5.0 10.0 15.0 Absolute Maximum Ratings 1 Parameter RF Power DC Current Operating Temperature Storage Temperature Ordering Information Part Number ETC1-1TTR Absolute Maximum 250 mW 240 mA 2 Package Tape and Reel (2000 piece Reel) -40C to +85C -55C to +125C 1. Operation of this device above any one of these parameters may cause permanent damage. 2. The maximum DC current applies to the secondary center tap in applications where the secondary is balanced. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. E-Series RF 1:1 Flux Coupled Transformer 3 - 200 MHz Pin Configuration Pin No. 1 2 3 4 5 ETC1-1T V10 Schematic Function Secondary Secondary CT Secondary Dot Primary Dot Primary 3 Secondary Dot Primary Dot 4 6 turns Primary 5 3 turns 2 Secondary CT 3 turns 1 Secondary Typical Performance Curves Insertion Loss Input Return Loss -10.0 -0.1 -15.0 -0.3 dB -20.0 -0.5 -0.7 -0.9 0.0 50.0 100.0 150.0 200.0 dB -25.0 -30.0 -35.0 0.0 50.0 100.0 150.0 200.0 Frequency (MHz) Phase Imbalance Freq (MHz) Amplitude Imbalance 185 183 0.05 0.00 -0.05 Degrees 181 dB 0 50 100 150 200 179 177 175 -0.10 -0.15 -0.20 -0.25 0.0 50.0 100.0 150.0 200.0 Freq (MHz) Freq (MHz) 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of ETC1-1T1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |